01 / 01
GuttersEXTERIOR SERVICE
Seamless gutters, installed in a day..
5" and 6" K-style and half-round. Aluminum, copper, or galvanized. LeafFilter and MasterShield guards. Run, hung, sloped, and sealed — same day.
✓Seamless — rolled on-site from coil stock
✓Hidden hangers every 24" (most companies do 36")
✓3"x4" downspouts on 6" gutters — not 2"x3"
✓32 standard colors, any RAL custom
● ACTIVE
GAF MASTER ELITE
GuttersTop 3% nationally
412WORKS COMPLETED SINCE 2011
50 YRMATERIAL WARRANTY
1-2CREW DAYS TYPICAL
$0HIDDEN FEES
01 · PATHS
The right solution depends on how the house is used.
We do not treat every project in this category as the same job. Scope, disruption, budget, and long-term value change depending on which path fits the house and your actual goals.
Smaller roof loads
5-inch systems
Used where roof size, water volume, and visual scale still make a smaller system reasonable.
•Best for modest roof sections•Cleaner profile on smaller homes•Not ideal where runoff volume is high
Recommended default
6-inch systems
Our usual recommendation because it handles more water, more debris, and more Maine weather variation with less overflow risk.
•Handles substantially more runoff•Better match for steeper and larger roofs•Preferred for long-term performance
Reduced maintenance
Guarded / specialty systems
Best where tree cover, access difficulty, or maintenance avoidance are part of the decision.
•Good for pine-heavy or tall homes•Helps reduce seasonal cleanouts•Works best when the whole water path is sized correctly
02 · SCOPE
WHAT'S INCLUDING IN EVERY JOB
Every line item below is in the contract. No surprises, no "we'll figure it out on-site." If we do the work, these are part of the price.
01
Tear-off
Remove old gutters, downspouts, and fascia damage repair at cost.
02
Fascia board
Inspect; replace rotted sections before hanging.
03
Gutter run
Seamless aluminum, rolled on-site, cut to length.
04
Hangers
Hidden-hanger system with screws, every 24".
05
End caps + corners
Crimped and sealed, not riveted.
06
Downspouts
3x4" on 6" gutters, 2x3" on 5", strap every 8 ft.
07
Splash blocks
Concrete or rubber at discharge points.
08
Cleanup
All debris hauled, magnet sweep for screws.
03 · EARLY WARNING
Signs your roof is already telling on itself.
CATCH IT EARLY AND THIS IS A
ROOFING JOB.
WAIT TOO LONG AND IT BECOMES
ROOFING + DECKING + INSULATION +
CEILING.
01
Overflow at valleys
Often means the gutter size, pitch, or downspout capacity is wrong for the roof section.
02
Sagging runs
Usually a fastening pattern or fascia problem, not just an old gutter problem.
03
Water at foundation corners
Drainage path and discharge points may be failing even if the gutters still look intact.
04
Rotten fascia edges
The water issue may have already moved into the trim and roof edge assembly.
04 · MATERIALS
We only installwhat we'd put on our own house.
Standard
.032 aluminum
Thicker than the .027 most companies use. Stiffer, holds shape better under snow.
Heavy-duty
.040 aluminum
For long runs or exposed eaves. ~15% upcharge but much stiffer.
Luxury / historic
Copper
16-oz copper, soldered corners, will develop patina. 75+ year life.
Guard system
LeafFilter
Stainless micro-mesh over a pitched frame. Transferable lifetime warranty.
05 · PROCESS
How the job runs, start to finish.
01
Measure
We measure every run, count corners, map downspouts.
02
Quote
Per-foot price + downspouts + guards if wanted. Valid 30 days.
03
Install day
Whole house typically done in 1 day. Crew of 2, truck-mounted coil machine.
04
Test
Run a hose through every run — check flow, fittings, pitch.
05
Cleanup
All debris hauled same day.
06 · RECENT WORK
View All →Selected Gutters projects
07 · Reviews
Loading reviews
08 · COVERAGE
Gutters in your town
Based in Hudson, we cover all of Penobscot County — and the closer neighborhoods of Hancock and Waldo counties. 45-minute radius from our yard, same-day response within 30
09 · QUESTIONS
Things people actually ask.
More questions? Call +1 (207) 219-5669 or request an estimate — we don't believe in pressure sales.
5" or 6" gutters?
6" handles roughly 40% more water and is what we recommend for most Maine roofs. 5" only if the roof is small or the look matters (6" is noticeably bigger).
Do gutter guards actually work?
Guard systems such as LeafFilter are designed to reduce debris buildup and seasonal cleanouts while maintaining water flow when the entire drainage path is properly sized.
What colors are available?
32 standard colors are available, and custom RAL colors can also be ordered.
How often should gutters be cleaned?
Cleaning frequency depends on surrounding tree cover and debris load. Guard systems can help reduce the need for regular cleanouts.
NEXT STEP
READY TO PRICE YOUR Gutters JOB
On-site visit, drone scan if relevant, written line-item quote within 48 hours. No pressure, no fine print.